HOME > ALLEGRO CONFINED SPACE > RESPIRATOR PRODUCTS > FULLY DISPOSABLE HOOD SYSTEMS
FULLY DISPOSABLE HOOD SYSTEMS
AIR RESPIRATORS | AMBIENT AIR PUMPS | LOW PRESSURE SYSTEMS | FULLY DISPOSABLE HOOD SYSTEM | 4 STEP HOOD | FILTRATION PANELS | REMOTE CO ALARM | CO MONITOR CALIBRATION | AIR-CART
FULLY DISPOSABLE HOOD SYSTEMS

The Fully Disposable Hoods are not just convenient, they're completely flexible. Available in poly-coated Tyvek, poly-coated Tyvek with a double bib, or saran-coated Tyvek, the hoods are completely disposable thanks to an integrated breathing tube. Our universal hood, provides either a low pressure or high pressure* SAR system made possible by a swivel-style, threaded female hose connector incorporated into the hood. Select the air controller best suited to your job and whether you're working in a spray paint booth, asbestos abatement site, laboratory or pharmaceutical manufacturing facility, you'll have the right SAR for the job.

  • Part No. 9910-25 Lens Covers (10 each)
  • Part No. 9910-03 Ratchet Suspension
FLOW PRESSURE FLOW ADAPTER

For use as a low pressure supplied air respirator, the Low Pressure Flow Adapter allows the hood to connect to an ambient air pump, or any low pressure air source. It is a low profile, lightweight, plastic threaded fitting that offers the convenience of OBAC quick connect design with a belt and clip assembly. The controller is economical enough to dispose of with the hood assembly or save for use with a replacement hood. It requires an air supply pressure range of 2 to 40 psi.

  • Part No. 9910-D Poly-Coated Tyvek Hood with Low Pressure Flow Adapter
  • Part No. 9910-DS Saran Hood with Low Pressure Flow Adapter
  • Part No. 9912-D Double Bib Tyvek Hood with Low Pressure Flow Adapter
  • Part No. 9910-11 Low Pressure Flow Adapter w/ belt
  • Part No. 9911-10 Replacement Fully Disposable Tyvek Double Bib Hood w/ suspension
  • Part No. 9911-20 Replacement Fully Disposable Tyvek Hood Assembly w/ suspension
  • Part No. 9911-20S Replacement Fully Disposable Saran Hood Assembly w/ suspension

HIGH PRESSURE CONTROLLERS

For use as a high pressure supplied air system, add one of the following flow control valves. All three offer a very low profile design that won't get in the way of work, meet NIOSH minimum flow requirements at their lowest setting and offer Hansen fittings and airline hose with belt and clip assembly. These economical valves allow you to use the appropriate hood assembly for your needs, dispose of the hood after contamination, and attach the original valve and waist belt to a new replacement hood.

ADJUSTABLE FLOW CONTROL VALVE

The high pressure Adjustable Flow Control Valve adjusts air flow from any high pressure air source for greater comfort. It offers a large gripping handle that makes it easy to use with a gloved hand. From the lowest flow position, the control valve will deliver the minimum flow required by NIOSH. It requires an air supply pressure range from 20 to 45 psig.

  • Part No. 9911CV Poly-Coated Tyvek Hood with Flow Control Valve
  • Part No. 9911-CVS Saran Hood with Flow Control Valve
  • Part No. 9912-CV Double Bib Tyvek Hood with Flow Control Valve
  • Part No. 9992 Adjustable Flow Control Valve w/ belt
  • Part No. 9911-20 Replacement Fully Disposable Tyvek Hood Assembly w/ suspension
  • Part No. 9911-20S Replacement Fully Disposable Saran Hood Assembly w/ suspension
  • Part No. 9911-10 Replacement Fully Disposable Tyvek Double Bib Hood w/ suspension
PERSONAL AIR COOLER

The Personal Air Cooler is ideal in hot environments, adjusting the air flow from high pressure air sources as low as 25 degrees colder than ambient air for an improved working environment. The personal cooler requires air pressure range of 55-85 psig.

  • Part No. 9911-C Poly-coated Tyvek Hood with Personal Air Cooler
  • Part No. 9911-CS Saran Hood with Personal Air Cooler
  • Part No. 9912-C Double Bib Tyvek Hood with Personal Air Cooler
  • Part No. 9991 Personal Air Cooler w/ belt
  • Part No. 9911-20 Replacement Fully Disposable Tyvek Hood Assembly w/ suspension
  • Part No. 9911-20S Replacement Fully Disposable Saran Hood Assembly w/ suspension
  • Part No. 9911-10 Replacement Fully Disposable Tyvek Double Bib Hood w/ suspension
AIR TEMPERATURE CONTROLLER

The Air Temperature Controller adjusts the amount of air to the hood and adjusts air 25 degrees warmer or cooler than the ambient air for use in cold or hot environments. It includes a leather sheath to protect the user from temperature extremes. The Air Temperature Controller requires an air supply pressure range of 85-110 psig.

  • Part No. 9911-HC Poly-coated Tyvek Hood with Air Temperature Controller
  • Part No. 9911-HCS Saran Hood with Air Temperature Controller
  • Part No. 9912-HC Double Bib Tyvek Hood with Air Temperature Controller
  • Part No. 9990 Air Temperature Controller w/ belt
  • Part No. 9911-20 Replacement Fully Disposable Tyvek Hood w/ suspension
  • Part No. 9911-20S Replacement Fully Disposable Saran Hood w/ suspension
  • Part No. 9911-10 Replacement Fully Disposable Tyvek Double Bib Hood w/ suspension
Copyright 2006 ELS Products Corp | Homepage | Site Map | Web Design by NYLI